Skip to content

Formation of Ni-W-P/Cu Electrodes for Silicon Solar Cells by Electroless Deposition

무전해 도금을 이용한 Si 태양전지 Ni-W-P/Cu 전극 형성

Document Type
Publications · Journal Article
Registered DB
KCI
Journal
한국표면공학회지49(1) · pp.54 · 2016
Citation
KCI 1
ISSN
1225-8024

Authors

  1. 김은주First author재료연구소
  2. Kim, Kwang Ho부산대학교
  3. 이덕행호진플라텍
  4. 정운석㈜호진플라텍
  5. 임재홍Corresponding author한국기계연구원부설 재료연구소

Abstract

Screen printing of commercially available Ag paste is the most widely used method for the front side metallization of Si solar cells. However, the metallization using Ag paste is expensive and needs high temperature annealing for reliable contact. Among many metallization schemes, Ni/Cu/Sn plating is one of the most promising methods due to low contact resistance and mass production, resulting in high efficiency and low production cost. Ni layer serves as a barrier which would prevent copper atoms from diffusion into the silicon substrate. However, Ni based schemes by electroless deposition usually have low thermal stability, and require high annealing process due to phosphorus content in the Ni based films. These problems can be resolved by adding W element in Ni-based film. In this study, Ni-W-P alloys were formed by electroless plating and properties of it such as sheet resistance, resistivity, specific contact resistivity, crystallinity, and morphology were investigated before and after annealing process by means of transmission line method (TLM), 4-point probe, X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM).

Keywords

Silicon solar cellsElectroless platingNi-W-PSpecific contact resistance

Identifiers

KCI
ART002087703