Skip to content

Nickel Hydroxide Nanoflakes Grown on Carbonized Melamine Foam via Chemical Bath Deposition for Supercapacitor Electrodes

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q4Scopus Q3
Citation
Web of Science 9Scopus 10
FWCI (Scopus)
0
JCR IF
JCR 2019 1.573
ISSN
1452-3981

Authors

  1. Jeong, SeongwooFirst authorSchool of Materials Science and Engineering, Pusan National University, San 30 Jangjeon-dong, Geumjeong-gu, Busan 609-735, Republic of Korea
  2. Yun, JemoonGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, San 30 Jangjeon-dong, Geumjeong-gu, Busan 609-735, Republic of Korea
  3. Shinde, Nanasaheb M.Global Frontier R&D Center for Hybrid Interface Materials, Pusan National University, San 30 Jangjeon-dong, Geumjeong-gu, Busan 609-735, Republic of Korea
  4. Kim, Kyung SuSchool of Materials Science and Engineering, Pusan National University, San 30 Jangjeon-dong, Geumjeong-gu, Busan 609-735, Republic of Korea
  5. Kim, Kwang HoCorresponding authorSchool of Materials Science and Engineering, Pusan National University, San 30 Jangjeon-dong, Geumjeong-gu, Busan 609-735, Republic of Korea

Abstract

Ni(OH)(2) nanoflakes were deposited on a carbonized melamine foam (CMF) substrate (Ni(OH)(2) @CMF) via chemical bath deposition at room temperature. This was achieved by using three different Ni(OH)(2) precursor solution concentrations. Ni(OH)(2) @CMF-0.05 was obtained using a 0.05 M Ni(OH)(2) solution and exhibited a high specific capacitance of 1066 F g(-1) at a specific current of 1 A g(-1); further, this material retained a specific capacitance of 698 F g(-1) at a specific current of 5 A g(-1). At a scan rate of 5 mV s(-1), the specific capacitance of Ni(OH)(2)@CMF-0.05 was 965 F g(-1). This excellent electrochemical performance is ascribed to the large amount of functional groups in CMF, which allowed for its facile reaction with Ni(OH)(2) during the synthesis of Ni(OH)(2) @CMF as well as with the hydroxide ions in the electrolyte during charge/discharge cycles. The monolithic device, which was achieved owing to the three-dimensional structure of ClVfF, delivered a high energy density of 27.5 Wh kg(-1) at a power density of 140 W kg(-1) and a high power density of 7.5 kW kg(-1) at an energy density of 6.6 Wh kg(-1). The device retained 100% of its energy density after 8000 charge/discharge cycles. This work suggests a potential approach to utilize melamine foam as a substrate for the low-cost growth of metal hydroxide nanostructures that can be used as electrode supercapacitors.

Keywords

Ni(OH)(2)N-doped carbonmelamine foamCBDsupercapacitorNI(OH)(2) NANOSHEETSFUNCTIONAL-GROUPSPERFORMANCEGRAPHENERUO2ARCHITECTUREMECHANISMDENSITYFILMNi(OH)2

Identifiers

Scopus EID
2-s2.0-85082041766
WoS UID
000514818500021