Lead Acetate Assisted Interface Engineering for Highly Efficient and Stable Perovskite Solar Cells
- Document Type
- Publications · Journal Article
- Registered DB
- SCIEScopus
- Journal Ranking
- JCR Q1Scopus Q1
- Journal
- ACS APPLIED MATERIALS & INTERFACES12(6) · pp.7186 · 2020
- Citation
- Web of Science 19Scopus 22
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 8.758
- ISSN
- 1944-8244
Authors
- Zhang, YuanyuanFirst authorHybrid Interface Materials Global Frontier Research Group, Pusan National University, Busan 608-737, South Korea
- Ma, YongchaoHybrid Interface Materials Global Frontier Research Group, Pusan National University, Busan 608-737, South Korea
- Shin, InsooHybrid Interface Materials Global Frontier Research Group, Pusan National University, Busan 608-737, South Korea
- Jung, Yun KyungDepartment of Biomedical Engineering, Inje University, Gimhae 50834, South Korea
- Lee, Bo RamDepartment of Physics, Pukyong National University, Busan 48513, South Korea
- Wu, SangwookHybrid Interface Materials Global Frontier Research Group, Pusan National University, Busan 608-737, South Korea
- Jeong, Jung HyunDepartment of Physics, Pukyong National University, Busan 48513, South Korea
- Lee, Byoung HoonDivision of Chemical Engineering and Materials Science, Ewha Womans University, Seoul 03760, South Korea
- Kim, Joo HyunDepartment of Polymer Engineering, Pukyong National University, Busan 608-739, South Korea
- Kim, Kwang HoCorresponding authorHybrid Interface Materials Global Frontier Research Group, Pusan National University, Busan 608-737, South Korea
- Sung Heum ParkHybrid Interface Materials Global Frontier Research Group, Pusan National University, Busan 608-737, South Korea
Abstract
High power conversion efficiency (PCE) and long-term stability are inevitable issues faced in practical device applications of perovskite solar cells. In this paper, significant enhancements in the device efficiency and stability are achieved by using a surface-active lead acetate (Pb(OAc)(2)) at the top or bottom of CH3NH3PbI3 (MAPbI(3))-based perovskite. When a saturated Pb(OAc)(2) solution is introduced on the top of the MAPbI(3) perovskite precursor, the OAc- in Pb(OAc)(2) participates in lattice restructuring of MAPbI(3) to form MAPbI(3-x)(OAc)(x), thereby producing a high-quality perovskite film with high crystallinity, large grain sizes, and uniform and pinhole-free morphology. Moreover, when Pb(OAc)(2) solution is mixed in the poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS) solution in the bottom way, the OAC(-) in Pb(OAc)(2) improves the water resistance of PEDOT-PSS. As the OAc- easily bonds with the Pb2+, the deposition of MAPbI(3) precursor onto the Pb(OAc)(2) mixed with PEDOT-PSS results in a reduction of the uncoordinated Pb, leading to strong stabilization of the perovskite layer. Both the top- and bottom-treated devices exhibit enhanced PCE values of 18.93% and 18.28%, respectively, compared to the conventional device with a PCE of 16.47%, which originates from decreased trap sites and reduced energy barriers. In particular, the bottom-treated device exhibits long-term stability, with more than 84% of its initial PCE over 800 h in an ambient environment.
Keywords
Pb(OAc)(2)top and bottom wayshigh efficiencylong-term stabilityperovskite solar cellsPERFORMANCEPEDOTPSSSTABILITYLAYERFILMSPb(OAc)2
Identifiers
- Scopus EID
- 2-s2.0-85079351899
- WoS UID
- 000514256400037



Login
Back to Publication list