Skip to content

Characteristics of Mechanical Properties and Micro Structure according to High-Frequency Induction Heating Conditions in Roll Forming Process of a Sill Side Part

실사이드 부품의 롤포밍공정에서 고주파유도가열 부가조건에 따른 기계적 특성 및 미세조직 평가

Document Type
Publications · Journal Article
Registered DB
KCI
Journal
한국기계가공학회지16(6) · pp.87 · 2017
Citation
KCI 4
ISSN
1598-6721

Authors

  1. Kun-Young KimFirst author부산대학교 융합학부, 세원기술연구소
  2. Lee-Jon Choy부산대학교 융합학부
  3. 신현일세원기술연구소
  4. 이창훈세원기술연구소
  5. Kang, MyungchangCorresponding author부산대학교
  6. 조준행세원기술연구소

Abstract

Hot stamping processes are possible for tensile strength 1.4 GPa but the strength reduction is appeared from the cooling performance unbalance. And the strength of roll forming process is below than that of hot stamping process owing to using the steel which is lower strength of boron steel. In this study, We provide roll forming process asssisted high-frequency induction heating to solve the problem of conventional one. The experiments were carried out at under various sill side part conditions: high-frequency induction heating conditions of 15, 18, 21, 24, 27 and 30 kW. The high-frequency induction heating temperature was checked with Infrared camera and the sill side parts of mechanical properties and microstructure were measured. The heating temperature of high frequency induction was measured to max 850 ℃ under the coil power of 30 kW. The tensile strength was 1.5 GPa and hardness was 490 Hv. The martensite structure was discovered under coil power of 30 kW. The weight of steel material sill side having thickness 1.5 mm and the boron steel sill side having thickness 1.2 mm were compared to weight effect. The boron steel sill side reduced 11.5 % compared to steel. Consequently, manufacturing process of 1.5 giga-grade’s sill side part was successfully realized by the roll forming assisted high-frequency induction heating methods.

Keywords

실사이드고주파 유도가열롤포밍보론강기가급 강재Sill SideHigh Frequency Induction HeatingRoll FormingBoron SteelGIGA-Grade Steel

Identifiers

KCI
ART002295265