Skip to content

Accelerating heterogeneous nucleation to increase hardness and electrical conductivity by deformation prior to ageing for Cu-4 at.% Ti alloy

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q3Scopus Q3
Journal
PHILOSOPHICAL MAGAZINE LETTERS99(8) · pp.275 · 2019
Citation
Web of Science 12Scopus 13
FWCI (Scopus)
0.37
JCR IF
JCR 2018 1.117
ISSN
0950-0839

Authors

  1. Han, Seung ZeonFirst authorComputational Materials Department, Korea Institute of Materials Science, Changwon, Korea
  2. Semboshi, SatoshiTrans-Regional Corporation Center for Industrial Materials Research, Tohoku University, Sendai, Japan
  3. Ahn, Jee HyukComputational Materials Department, Korea Institute of Materials Science, Changwon, Korea
  4. Choi, Eun-AeComputational Materials Department, Korea Institute of Materials Science, Changwon, Korea
  5. Jo, MinahSchool of Materials Science and Engineering, Pusan National University, Busan, Korea
  6. Kadoi, YusukeTrans-Regional Corporation Center for Industrial Materials Research, Tohoku University, Sendai, Japan
  7. Kim, Kwang HoSchool of Materials Science and Engineering, Pusan National University, Busan, Korea
  8. Lee, JehyunCorresponding authorDepartment of Materials Science and Engineering, Changwon National University, Changwon, Korea

Abstract

Deformation bands, especially shear bands were intentionally formed in supersaturated Cu-4 at.% Ti alloy by groove-rolling with 75% area reduction. Cold deformation prior to the ageing process changed the precipitation behaviour of the alloy. The deformed structure with shear bands was maintained, without showing recovery and recrystallisation, even after prolonged ageing at 450?C for more than one day. The thermally stable shear bands act as nucleation initiation sites and prevent the expansion of discontinuous cellular precipitates. The hardness reached a value of 305?Hv and an electrical conductivity of 15% IACS (IACS?=?International Annealed Copper Standard. 100% IACS is defined as the conductivity corresponding to a volume resistivity at 20?C of 17.241?n?), compared to 283?Hv and 13% IACS for conventional solid-solutioned and peak-hardened alloy. In addition, the ageing time to reach the highest hardness was shortened from 720 to 180?min at 450?C.

Keywords

Copper-titanium alloysshear banddiscontinuous precipitationheterogeneous nucleationelectrical conductivityDISCONTINUOUS PRECIPITATIONTITANIUMCOPPERTENSILE

Identifiers

Scopus EID
2-s2.0-85073608882
WoS UID
000488686900001