Sb2S3 Nanoparticles Anchored or Encapsulated by the Sulfur-Doped Carbon Sheet for High-Performance Supercapacitors
- Document Type
- Publications · Journal Article
- Registered DB
- SCIEScopus
- Journal Ranking
- JCR Q1Scopus Q1
- Journal
- ACS APPLIED MATERIALS & INTERFACES11(37) · pp.33966 · 2019
- Citation
- Web of Science 64Scopus 68
- FWCI (Scopus)
- 1.84
- JCR IF
- JCR 2018 8.456
- ISSN
- 1944-8244
Authors
- Sahoo, Rakesh K.First authorGlobal Frontier R&D Center for Hybrid Interface Materials and National Core Research Center for Hybrid Materials Solution, Pusan National University, 2, Busandaehak-ro, 63 beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea
- Singh, SaurabhSchool of Materials Science and Engineering, Pusan National University, 2, Busandaehak-ro, 63 beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea
- Yun, Je MoonCorresponding authorGlobal Frontier R&D Center for Hybrid Interface Materials and National Core Research Center for Hybrid Materials Solution, Pusan National University, 2, Busandaehak-ro, 63 beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea
- Kwon, Se HunSchool of Materials Science and Engineering, Pusan National University, 2, Busandaehak-ro, 63 beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea
- Kim, Kwang HoSchool of Materials Science and Engineering, Pusan National University, 2, Busandaehak-ro, 63 beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea
Abstract
The specific capacitance and energy density of antimony trisulfide (Sb2S3)@carbon supercapacitors (SCs) have been limited and are in need of significant improvement. In this work, Sb2S3 nanoparticles were selectively encapsulated or anchored in a sulfur-doped carbon (S-carbon) sheet depending on the use of microwave-assisted synthesis. The microwave-triggered Sb2S3 nanoparticle growth resulted in core-shell hierarchical spherical particles of uniform diameter assembled with Sb2S3 as the core and an encapsulated S-carbon layer as the shell (Sb2S3-M@S-C). Without the microwave mediation, the other nanostructure was found to comprise fine Sb2S3 nanoparticles widely anchored in the S-carbon sheet (Sb2S3-P@S-C). Structural and morphological analyses confirmed the presence of encapsulated and anchored Sb2S3 nanoparticles in the carbon. These two materials exhibited higher specific capacitance values of 1179 (0 to +1.0 V) and 1380 F.g(-1) (-0.8 to 0 V) at a current density of 1 A.g(-1), respectively, than those previously reported for Sb2S3 nanomaterials in considerable SCs. Furthermore, both materials exhibited outstanding reversible capacitance and cycle stability when used as SC electrodes while retaining over 98% of the capacitance after 10 000 cycles, which indicates their long-term stability. Furthermore, a hybrid SSb2S3-M@S-C/Sb2S3-P@S-C device was designed, which delivers a remarkable energy density of 49 W.h.kg(-1) at a power density of 2.5 kW.kg(-1) with long-term cycle stability (94% over 10 000 cycles) and is comparable to SCs in the recent literature. Finally, a light-emitting diode (LED) panel comprising 32 LEDs was powered using three pencil-type hybrid SCs in series.
Keywords
Sb2S3 nanoparticlesencapsulationanchoring sulfur-doped carbonsupercapacitorANTIMONY SULFIDEFACILE SYNTHESISSPHERESSHELLELECTRODEGRAPHENEANODEOXIDEPSEUDOCAPACITANCEFRAMEWORKS
Identifiers
- Scopus EID
- 2-s2.0-85072509057
- WoS UID
- 000487179900047



Login
Back to Publication list