Skip to content

A numerical study on fluid flow around two side-by-side rectangular cylinders with different arrangements

Document Type
Publications · Journal Article
Registered DB
KCISCIEScopus
Journal Ranking
JCR Q3Scopus Q2
Journal
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY33(7) · pp.3289 · 2019
Citation
Web of Science 12Scopus 16KCI 0
FWCI (Scopus)
0.35
JCR IF
JCR 2018 1.221
ISSN
1738-494X

Authors

  1. Lee Sung JinFirst authorSchool of Mechanical Engineering, Pusan National University, Jang Jeon 2-Dong, Geum Jeong Gu, Busan, 609-735, Korea
  2. Mun, Gi SuSchool of Mechanical Engineering, Pusan National University, Jang Jeon 2-Dong, Geum Jeong Gu, Busan, 609-735, Korea
  3. Park, Yong GapRolls-Royce and Pusan National University Technology Centre in Thermal Management, Jang Jeon 2-Dong, Geum Jeong Gu, Busan, 609-735, Korea
  4. Ha, Man YeongCorresponding authorSchool of Mechanical Engineering, Pusan National University, Jang Jeon 2-Dong, Geum Jeong Gu, Busan, 609-735, Korea

Abstract

This study numerically examines the flow around a pair of parallel rectangular cylinders placed perpendicular to the direction of the flow using the immersed boundary method at a fixed Reynolds number of 100. A total of eight spacing ratios between 0.1 and 2 are considered in the two arrangements of the cylinders. The two cylinders are arrayed in inline and a staggered arrangement. The pattern of the wake of the two cylinders depends on their arrangements and spacing. The results, show four flow regimes: (i) A single bluff-body regime, (ii) an asymmetric wake regime, (iii) a transition regime, and (iv) a coupled street regime. All flow regimes appear in the case of the inline arrangement. In the case of the staggered arrangement, only the three flow regimes other than the coupled street flow regime are shown. The flow characteristics depend on the flow regime, including the flow structure, drag force, lift force, and frequency. We analyzed the flow characteristics by comparing the flow regimes, vortex shapes, drag and lift coefficients, and Strouhal numbers, which depended on the arrangement. The results of the drag, lift, and Strouhal numbers depend on the interaction of the jet that forms between the cylinders and the adjacent wakes near the cylinder. Therefore, the flow characteristics are sensitive to the arrangement and the distance between the cylinders.

Keywords

Forced convectionSide-by-side arrangementImmersed boundary methodVortex sheddingFlow regimesLow Reynolds numberSQUARE CYLINDERSCIRCULAR-CYLINDERSWAKEPAIRTURBULENTSTEP

Identifiers

Scopus EID
2-s2.0-85068777225
WoS UID
000484746000024
KCI
ART002482062