Effect of the Geosynthetic Installation on the Compaction Curve and Compaction Efficiency
- Document Type
- Publications · Journal Article
- Registered DB
- KCISCIEScopus
- Journal Ranking
- JCR Q3Scopus Q2
- Journal
- KSCE JOURNAL OF CIVIL ENGINEERING22(12) · pp.4841 · 2018
- Citation
- Web of Science 2Scopus 1KCI 1
- FWCI (Scopus)
- 0.09
- JCR IF
- JCR 2017 0.94
- ISSN
- 1226-7988
Authors
- Kim, ChangyoungFirst authorSK Engineering and Construction, Seoul, South Korea
- Im, Jong ChulCorresponding authorDept. of Civil Engineering, Pusan National University, Busan, South Korea
- Yoo, Jae-WonDept. of Civil Engineering, Research Institute of Industrial Technology, Pusan National University, Busan, South Korea
Abstract
Compaction is performed to avoid ground settlement during backfilling or embankment construction. In this study, Proctor compaction tests according to KS F 2312 were performed by installing geosynthetics (with and without geosynthetics) and changing the compaction type (A and D), type of geosynthetics (geogrid and polyester (PET) mat), number of reinforced geosynthetic layers (1-4 layers), and number of blows per layer (55, 50, 45, and 40). Using a geogrid (or PET mat) reduced the optimum water content (omega(opt)) by 7.5% (8.3% for PET mat) and 12.7% (8.2% for PET mat) and increased the maximum dry density (gamma(dmax)) by 3.9% (4.2% for PET mat) and 5.5% (4.8% for PET mat) for compaction test types A and D, respectively. In compaction without geosynthetics, the required compaction energy increased by 1.35 and 1.27 times compared to the value to achieve the identical gamma(dmax) with 4 geosynthetic layers for the geogrid and PET mat, respectively. Thus, efficient compaction is possible by decreasing the compaction energy required to achieve the target dry density with geosynthetic installation. The effect of geosynthetics during compaction to improve the compaction degree has also been proven with a field test.
Keywords
geosyntheticsProctor compaction testcompactioncompaction energycompaction curvemaximum dry densityoptimum water content
Identifiers
- Scopus EID
- 2-s2.0-85055703162
- WoS UID
- 000452030700013
- KCI
- ART002406592



Login
Back to Publication list