Skip to content

Distribution of Optimum Yield-Strength and Plastic Strain Energy Prediction of Hysteretic Dampers in Coupled Shear Wall Buildings

Document Type
Publications · Journal Article
Registered DB
KCISCIEScopus
Journal Ranking
JCR Q4Scopus Q3
Citation
Web of Science 5Scopus 6KCI 2
FWCI (Scopus)
0.37
JCR IF
JCR 2017 0.734
ISSN
1598-2351

Authors

  1. Bagheri, BahadorFirst authorCorresponding authorDepartment of Architectural Engineering, Pusan National University, Busan, South Korea
  2. Oh, Sang HoonDepartment of Architectural Engineering, Pusan National University, Busan, South Korea
  3. Shin, Seung-HoonDepartment of Architectural Engineering, Pusan National University, Busan, South Korea

Abstract

The structural behavior of reinforced concrete coupled shear wall structures is greatly influenced by the behavior of their coupling beams. This paper presents a process of the seismic analysis of reinforced concrete coupled shear wall-frame system linked by hysteretic dampers at each floor. The hysteretic dampers are located at the middle portion of the linked beams which most of the inelastic damage would be concentrated. This study concerned particularly with wall-frame structures that do not twist. The proposed method, which is based on the energy equilibrium method, offers an important design method by the result of increasing energy dissipation capacity and reducing damage to the wall's base. The optimum distribution of yield shear force coefficients is to evenly distribute the damage at dampers over the structural height based on the cumulative plastic deformation ratio of the dissipation device. Nonlinear dynamic analysis indicates that, with a proper set of damping parameters, the wall's dynamic responses can be well controlled. Finally, based on the total plastic strain energy and its trend through the height of the buildings, a prediction equation is suggested.

Keywords

Coupled shear wallPassive control systemOptimum distribution of yield shear force coefficients of dampersPlastic strain energy of dampers

Identifiers

Scopus EID
2-s2.0-85056782086
WoS UID
000451957600003
KCI
ART002404020