Skip to content

Enhancement of Magnetoelectric Conversion Achieved by Optimization of Interfacial Adhesion Layer in Laminate Composites

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q1Scopus Q1
Journal
ACS APPLIED MATERIALS & INTERFACES10(38) · pp.32323 · 2018
Citation
Web of Science 53Scopus 55
FWCI (Scopus)
1.2
JCR IF
JCR 2017 8.097
ISSN
1944-8244

Authors

  1. Hwang, Geon-TaeFirst authorKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  2. Palneedi, HaribabuKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  3. Jung, Byung MunKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  4. Kwon, Suk JinKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  5. Peddigari, MaheshKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  6. Min, YuhoKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  7. Kim, Jong-WooKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  8. Ahn, Cheol-WooKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  9. Choi, Jong-JinKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  10. Hahn, Byung-DongKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  11. Choi, Joon-HwanKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  12. Yoon, Woon-HaKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  13. Park, Dong-SooKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  14. Lee, Sang-BokKorea Institute of Materials Science (KIMS), Seongsan-gu, Changwon, Gyeongnam, South Korea
  15. Choe, YoungsonChemical and Biomolecular Engineering, Pusan National University, Busan, South Korea
  16. Kim, Kwang HoCorresponding authorSchool of Materials Science and Engineering, Pusan National University, Busan, South Korea
  17. Ryu, JunghoSchool of Materials Science and Engineering, Yeungnam University, Gyeongsan, Gyeongbuk, South Korea

Abstract

We report the effect of epoxy adhesion layers with different mechanical or physical property on a magnetoelectric (ME) composite laminate composed of FeBSi alloy (Metglas)/single-crystal Pb(Mg1/3Nb2/3)O-3-Pb(Zr,Ti)O-3/Metglas to achieve an improved ME conversion performance. Through theoretical simulation, it was revealed that the Young's modulus and the thickness of interfacial adhesives were major parameters that influence the conversion efficiency in ME composites. In the experimental evaluation, we utilized three epoxy materials with a distinct Young's modulus and adjusted the average thickness of the adhesion layers to optimize the ME conversion. The experimental results show that a thin epoxy layer with a high Young's modulus provided the best performance in the inorganic-based ME conversion process. By tailoring the interfacial adhesion property, the ME laminate generated a high conversion coefficient of 328.8 V/(cm Oe), with a mechanical quality factor of 132.0 at the resonance mode. Moreover, we demonstrated a highly sensitive alternating current magnetic field sensor that had a detection resolution below 10 pT. The optimization of the epoxy layers in the ME laminate composite provided significant enhancement of the ME response in a simple manner.

Keywords

magnetoelectriccomposite laminateadhesion layerinterfacemagnetic sensorPIEZOELECTRIC SINGLE-CRYSTALSMECHANO-ELECTRIC GENERATORMAGNETIC SENSOR

Identifiers

Scopus EID
2-s2.0-85053606167
WoS UID
000446142100055