Skip to content

Microstructure and properties of Nb-doped diamond-like carbon films deposited by high power impulse magnetron sputtering

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q1
Journal
THIN SOLID FILMS663 · pp.159 · 2018
Citation
Web of Science 40Scopus 42
FWCI (Scopus)
1.07
JCR IF
JCR 2017 1.939
ISSN
0040-6090

Authors

  1. Ding, Ji ChengFirst authorSchool of Convergence Science, Pusan National University, Busan, South Korea
  2. Dai, WeiGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  3. Zhang, Teng FeiGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  4. Zhao, PinSchool of Convergence Science, Pusan National University, Busan, South Korea
  5. Yun, Je MoonGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  6. Kim, Kwang HoCorresponding authorSchool of Convergence Science, Pusan National University, Busan, South Korea
  7. Wang, Qi MinSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, China

Abstract

Niobium (Nb)-doped diamond-like carbon (Nb-DLC) films were deposited on Si and stainless steel substrates using a hybrid deposition system composed of a high power impulse magnetron sputtering (HiPIMS) and a pulse direct current magnetron sputtering (PDC-MS). The Nb concentration (0-23.43 at. %) in the film was controlled by adjusting the PDC power. The influences of Nb doping on the composition, phase structure, microstructure, and carbon atoms bond of DLC films were studied from various measurement tools, such as X-ray photoelectron spectroscope, X-ray diffraction, transmission electron microscope, scanning electron microscope, atomic force microscope and Raman spectroscope. Nano-indentation, stress-tester and ball-on-disk tribometer were also applied to study the mechanical properties and friction behavior, respectively. The results indicated that with increasing Nb concentration, the Nb-DLC films transformed from amorphous phase to nanocomposite structure with carbide phase embedding in the matrix of amorphous carbon. The surface morphology was composed of large agglomeration hills and the cross-sectional images exhibited apparent columnar structure. In addition, the increase in Nb content led to an increase of hardness initially, and then decreased with further increase of Nb content. The residual stress was decreased monotonically. The pure DLC film exhibited a lower friction coefficient and narrower width of wear scar, while the nanocomposite Nb-DLC films showed a high friction coefficient and large wear scar, although they possessed a high hardness. It could be ascribed to the formation of carbide hard particles as a result of scratching the contact surface during friction tests at high Nb doping concentration.

Keywords

Diamond-like carbonNiobium-dopingMicrostructureMechanical propertiesFriction propertiesHigh power impulse magnetron sputteringH THIN-FILMSTHERMAL-STABILITYNANOCOMPOSITE COATINGSMECHANICAL-PROPERTIESAMORPHOUS-CARBONION-IMPLANTATION

Identifiers

Scopus EID
2-s2.0-85052307612
WoS UID
000443012200023