Skip to content

Self-Cleaning Transparent Heat Mirror with a Plasma Polymer Fluorocarbon Thin Film Fabricated by a Continuous Roll-to-Roll Sputtering Process

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q1Scopus Q1
Journal
ACS APPLIED MATERIALS & INTERFACES10(12) · pp.10454 · 2018
Citation
Web of Science 22Scopus 24
FWCI (Scopus)
0.8
JCR IF
JCR 2017 8.097
ISSN
1944-8244

Authors

  1. Kim, Sung HyunFirst authorDepartment of Nano Fusion Technology, Pusan National University, Busan, South Korea
  2. Kim, MacChemical Materials Solutions Center, Korea Research Institute of Chemical Technology, Daejeon, South Korea
  3. Lee, Jae HeungChemical Materials Solutions Center, Korea Research Institute of Chemical Technology, Daejeon, South Korea
  4. Lee, Sang-JinCorresponding authorChemical Materials Solutions Center, Korea Research Institute of Chemical Technology, Daejeon, South Korea

Abstract

This paper proposes a novel self-cleaning transparent heat mirror (SC-THM) produced by depositing a plasma polymer fluorocarbon thin film on a silver-and-SiNx multilayer structure fabricated by continuous roll-to-roll sputtering. The optimal structure and the thickness of each thin film of three-layer and five-layer SC-THMs were derived from optical simulation. In the five-layer SC-THM, the visible light transmittance was 60.67% at a wavelength of 406 nm and the infrared (IR) transmittance was 6.86% at a 1000 nm wavelength and 2.50% at a 1500 nm wavelength. The value of the performance parameter T-vis/T-sol was 1.70. The SC-THM exhibited self-cleaning with a very good water repellency of more than 111 degrees, achieved by applying a low-surface-energy fluorocarbon thin film to the top layer. This study successfully demonstrated the IR blocking properties of an SC-THM through IR reflection and IR irradiation experiments.

Keywords

self-cleaningtransparent heat mirrorplasma polymer fluorocarbonroll-to-roll sputteringnear-IR reflectionZNO-GA FILMSOXIDECOATINGSDEPOSITIONSURFACESWINDOWS

Identifiers

Scopus EID
2-s2.0-85044644774
WoS UID
000428972700065