Skip to content

Low-temperature deposition of nanocrystalline Al2O3 films by ion source-assisted magnetron sputtering

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q1
Journal
VACUUM149 · pp.284 · 2018
Citation
Web of Science 30Scopus 33
FWCI (Scopus)
1.54
JCR IF
JCR 2017 2.067
ISSN
0042-207X

Authors

  1. Ding, Ji ChengFirst authorGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  2. Zhang, Teng FeiGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  3. Mane, Rajaram S.Global Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  4. Kim, Kwang HoGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  5. Kang, MyungchangGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  6. Zou, Chang WeiCorresponding authorSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, China
  7. Wang, Qi MinSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, China

Abstract

In this paper, bipolar pulse reactive magnetron sputtering with ion source assisted deposition method has been utilized for the deposition of nanocrystalline alumina (Al2O3) films at the temperature of 300 degrees C onto silicon (111) wafers, and cemented carbide substrates. The influence of ion source power, i.e. 0, 1.0, 1.5 and 2.0 kW on the structure, morphology, compressive stress and mechanical properties of the Al2O3 films were investigated. In absence of ion source power assistance, an amorphous Al2O3 film was dominant at deposition temperature of 300 degrees C. With ion source assisted deposition, the crystalline y Al2O3 films were obtained at the same conditions, suggesting an importance of ion source power in crystallinity development of metal oxide films obtained from magnetron sputtering deposition method. Images of surface morphology clearly demonstrated the difference in granular sizes of film surfaces prepared with and without ion source powers. With increasing ion source power from 1.0 to 2.0 kW, the micro-hardness and compressive stress of the films were increased from 7 GPa to 13 GPa and 03 GPa to 1.1 GPa, respectively. Results revealed that the reactive magnetron sputtering with the ion source assisted deposition was a simple and effective way to prepare nanocrystalline gamma-Al2O3 films at low temperature. (C) 2018 Elsevier Ltd. All rights reserved.

Keywords

Low temperature depositionNanocrystalline gamma-Al2O3 filmMicrostructureHardnessCERAMIC CUTTING TOOLSALUMINA THIN-FILMSDC MAGNETRONVAPOR-DEPOSITIONOXIDE FILMSCOATINGSWEARTEMPLATETRANSFORMATIONSMICROSTRUCTURE

Identifiers

Scopus EID
2-s2.0-85040307542
WoS UID
000425576100046