Skip to content

Discontinuous precipitation at the deformation band in copper alloy

Document Type
Publications · Journal Article
Registered DB
KCISCIEScopus
Journal Ranking
JCR Q1Scopus Q1
Journal
METALS AND MATERIALS INTERNATIONAL24(1) · pp.23 · 2018
Citation
Web of Science 24Scopus 26KCI 4
FWCI (Scopus)
0.97
JCR IF
JCR 2017 1.952
ISSN
1598-9623

Authors

  1. Han, Seung ZeonFirst authorStructural Materials Division, Korea Institute of Materials Science, Changwon, South Korea
  2. Ahn, Jee HyukStructural Materials Division, Korea Institute of Materials Science, Changwon, South Korea
  3. You, Young SooStructural Materials Division, Korea Institute of Materials Science, Changwon, South Korea
  4. Lee, JehyunCorresponding authorDepartment of Materials Science and Engineering, Changwon National University, Changwon, South Korea
  5. Goto, MasahiroDepartment of Mechanical Engineering, Oita University, Oita, Japan
  6. Kim, Kwang HoSchool of Materials Science and Engineering, Pusan National University, Busan, South Korea
  7. Kim, SangshikDepartment of Materials Science and Engineering, ReCAPT, Gyeongsang National University, Chinju, South Korea

Abstract

The Cu-Ni-Si alloy is known as a precipitation hardening alloy, where the Ni2Si intermetallic compound is precipitated in the matrix during aging. There are two types of precipitation of Ni2Si: continuous and discontinuous cellular. The discontinuous cellular precipitation is generally initiated at interfaces especially grain boundaries in the matrix. To observe the grain boundary effect on the discontinuous precipitation, a large-grained Cu-Ni-Si-Ti alloy was intentionally fabricated by unidirectional solidification and plastically deformed by groove rolling. While discontinuous cellular precipitation has been generally known to occur only at the high angled grain boundaries in the alloys, we found that it was also generated inside the grains, at the deformation bands formed by plastic deformation.

Keywords

Ni2Siintermetallicsagingdiscontinuous cellular precipitationshear bandNI-SI ALLOYSMECHANICAL-PROPERTIESCELLULAR PRECIPITATIONELECTRICAL-PROPERTIESBRIDGMAN METHODCRYSTAL-GROWTHTI ADDITIONCU ALLOYMICROSTRUCTURESN

Identifiers

Scopus EID
2-s2.0-85040103020
WoS UID
000419534500003
KCI
ART002304343