Skip to content

Integrated hot forming and heat treatment process on Al6061 tailor rolled blank

Document Type
Publications · Journal Article
Registered DB
KCISCIEScopus
Journal Ranking
JCR Q2Scopus Q1
Citation
Web of Science 13KCI 1
JCR IF
JCR 2016 1.497
ISSN
2234-7593

Authors

  1. Kim, Jae-HongFirst author부산대학교
  2. Kim, Byung MinCorresponding author부산대학교
  3. 이찬주한국생산기술연구원
  4. 이선봉계명대학교
  5. Ko, Dae-Cheol부산대학교

Abstract

Using the cold stamping process, aluminum tailor rolled blanks (TRB) have been recently used to manufacture automotive parts to reduce the body weight of cars. However, when used to achieve uniform mechanical properties, the conventional method of aluminum TRB leads to low formability and excessive springback, and it also requires additional heat treatment because of thickness difference and work hardening during the rolling process. This study proposed an integrated hot forming and heat treatment process to improve the formability and dimensional accuracy of Al6061 TRB. In this process, the heated sheet was immediately formed after the solution heat treatment, and was then rapidly quenched within cold dies. The practicality of this process for sheet forming of Al6061 TRB was evaluated by performing the Erichsen and V-bending tests. Furthermore, hardness was measured to confirm the uniform mechanical properties of the Al6061 TRB achieved after artificial and natural aging. The integrated hot forming and heat treatment process was also compared with the conventional forming method in terms of formability, dimensional accuracy, and mechanical properties, which demonstrated the feasibility of this process for Al6061 TRB.

Keywords

Integrated processDie quenchingTailor rolled blankFormabilityDimensional accuracyMechanical propertyALUMINUM-ALLOY SHEETBEHAVIORLIMIT

Identifiers

WoS UID
000392287600016
KCI
ART002186167