Skip to content

Float printing deposition to control the morphology of TiO2 photoanodes on woven textile metal substrates for TCO-free flexible dye-sensitized solar cells

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q1
Journal
RSC ADVANCES6(71) · pp.67331 · 2016
Citation
Web of Science 13
JCR IF
JCR 2015 3.289
ISSN
2046-2069

Authors

  1. Yun, Min JuFirst authorDepartment of Organic Material Science and Engineering, Pusan National University, Geumjeong-gu, Busan, South Korea
  2. Cha, Seung I.Corresponding authorDepartment of Organic Material Science and Engineering, Pusan National University, Geumjeong-gu, Busan, South Korea
  3. Seo, Seon HeeNano Hybrid Technology Research Center, Creative and Fundamental Research Division, Korea Electrotechnology Research Institute, Seongsan-gu, Changwon, South Korea
  4. Kim, HanseongDepartment of Organic Material Science and Engineering, Pusan National University, Geumjeong-gu, Busan, South Korea
  5. Lee, Dong Y.Nano Hybrid Technology Research Center, Creative and Fundamental Research Division, Korea Electrotechnology Research Institute, Seongsan-gu, Changwon, South Korea

Abstract

The rapid growth of portable smart devices demands wearable energy sources that convert environmental energy into electricity. Textile based solar cells are one of the most promising candidates. In particular, the rapid development of fiber or textile structured dye sensitized solar cells gives us an optimistic prospect. However, the fundamental printing process for textile based substrates, which is far different from that of TCO coated flat substrates, and the optimized morphology necessary to obtain the best performance have not yet been studied systemically. In this study, a new deposition method called the floating printing method is developed to obtain the uniform and controllable deposition of electrode materials on textile or wire type substrates to be utilized in a paste printing process. In addition, FEM analysis was performed to observe the effect of morphologies on short circuit currents and find an optimized morphology for the best energy conversion efficiency. As a result, we have found that the electron source or diffusion path enhanced electron transportation with a thin wire-top region and that a distorting diffusion path degraded the short circuit current with a thick wire-top region. TCO-free flexible DSSCs cells were prepared utilizing a metal textile substrate, a paper spacer and Pt coated carbon counter electrodes, and obtained a 4.16% energy conversion efficiency. The results can be extended to a 3-dimensional analysis considering various textile substrates.

Keywords

LOW-COSTFIBERELECTRODESWIRES

Identifiers

WoS UID
000380353600113