Skip to content

Polymer nanocomposite films with thicknesses (

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q1Scopus Q1
Journal
COMPOSITES SCIENCE AND TECHNOLOGY127 · pp.106 · 2016
Citation
Web of Science 6
JCR IF
JCR 2015 3.897
ISSN
0266-3538

Authors

  1. Cho, Hong-BaekFirst authorNagaoka Univ Technol, Dept Fus Chem Engn, Ansan 426791, KO
  2. Huynh, Diep PhuocNagaoka Univ Technol, Extreme Energy Dent Res Inst, Nagaoka, JA
  3. Nakayama, TadachikaCorresponding authorNagaoka Univ Technol, Extreme Energy Dent Res Inst, Nagaoka, JA
  4. Shin, Jung Ho부산대학교, KO
  5. Suematsu, HisayukiNagaoka Univ Technol, Extreme Energy Dent Res Inst, Nagaoka, JA
  6. Niihara, KoichiNagaoka Univ Technol, Extreme Energy Dent Res Inst, Nagaoka, JA
  7. Sung, Kihoon한양대학교, Dept Fus Chem Engn, Ansan 426791, KO
  8. Lee, Youngsuk한양대학교, Dept Fus Chem Engn, Ansan 426791, KO
  9. Kim, Seil한양대학교, Dept Fus Chem Engn, Ansan 426791, KO
  10. Song, YoSeb한양대학교, Dept Fus Chem Engn, Ansan 426791, KO
  11. Choa, Yong-Ho한양대학교, Dept Fus Chem Engn, Ansan 426791, KO

Abstract

Herein, Polysiloxane-based nanocomposite films with controlled assembly of modified graphite nano sheets (GNs) are fabricated, and their thermal and optical properties are evaluated as potential thermal interface materials (TIMs). The micro-dimensional thickness of the composite films is chosen to be the same as the average lateral dimension of GNs in order to create straightforward thermal conducting pathways with oriented GNs and to minimize heat loss through the polymer matrix. Paramagnetic iron oxide nanoparticles are deposited on the surface of GNs, which were obtained by the exfoliation of graphite flakes via chemical vapor deposition, and their anisotropic orientation inside a pre-polymer of polysiloxane is controlled by application of a magnetic field (0.45 T). The analysis revealed that the modified GNs were perpendicularly-oriented and anchored the film surfaces of the composite with high anisotropy under the application of a magnetic flux. The controlled assembly of GNs (5 wt%) enhanced the thermal diffusivity of the composites by 330% and 200% compared to a pristine polymer and a corresponding composite with a random distribution of GNs, respectively. The enhancements of the optical and thermal properties were elucidated in terms of variations in the magnetic susceptibility of GNs as well as the increased thermal conduction. (C) 2016 Elsevier Ltd. All rights reserved.

Keywords

Functional compositesPolymer-matrix composites (PMCs)Magnetic propertiesThermal propertiesOptical microscopyINTERFACE MATERIALSGRAPHENEDIFFUSIVITYCOMPOSITESFIELD

Identifiers

WoS UID
000374709700013