Effects of cryogenic thermal cycle and immersion on the mechanical characteristics of phenol-resin bonded plywood
- Document Type
- Publications · Journal Article
- Registered DB
- SCIEScopus
- Journal Ranking
- JCR Q3Scopus Q2
- Journal
- CRYOGENICS72 · pp.90 · 2015
- Citation
- Web of Science 23
- JCR IF
- JCR 2014 1.168
- ISSN
- 0011-2275
Authors
- Kim, Jeong-HyeonFirst authorDepartment of Naval Architecture and Ocean Engineering, Pusan National University, Geumjeong-gu, Busan, South Korea
- Park, Doo-HwanDepartment of Naval Architecture and Ocean Engineering, Pusan National University, Geumjeong-gu, Busan, South Korea
- Lee, Chi-SeungDepartment of Naval Architecture and Ocean Engineering, Pusan National University, Geumjeong-gu, Busan, South Korea
- Park, Kwang-JunGas Technology R and D Group, Daewoo Shipbuilding and Marine Engineering, Jung-gu, Seoul, South Korea
- Lee, Jae MyungCorresponding authorDepartment of Naval Architecture and Ocean Engineering, Pusan National University, Geumjeong-gu, Busan, South Korea
Abstract
The main objective of the present study is to investigate the performance degradation of the plywood used in a liquefied natural gas (LNG) cargo containment system (CCS). A plywood sheet features an odd number of thinly layered wooden plies bonded perpendicularly to the previous layer to give it a very strong and durable structure. Owing to this strong point, plywood is applied to a variety of interior and exterior applications. Above all, it is widely adopted as insulation panels in an LNG CCS owing to a high stiffness with low density and its superior mechanical capabilities. As an insulation material of an LNG CCS, plywood is constantly exposed to repeated wave-induced thermal variations caused by the loading (-163 degrees C) and unloading (20 degrees C) of LNG during general operating periods of 25 years on average. Therefore, the effects of cryogenic-level thermal loads on the material characteristics of plywood must be analyzed with respect to the design and safety aspects of LNG CCSs. In the present study, the influences of the estimated thermal load, testing temperature, and grain orientation on plywood adopted in an LNG CCS are investigated. In terms of safety and design, the repeated thermal loads in a LNG CCS must be considered because the modulus of elasticity (MOE), tensile strength (TS), and modulus of rupture (MOR) are degraded by thermal treatments, such as cyclic thermal-shock and cryogenic immersion. (C) 2015 Elsevier Ltd. All rights reserved.
Keywords
PlywoodLiquefied natural gasCargo containment systemCryogenic thermal cycleCryogenic immersionFORMALDEHYDE RESINWOODLNGOPTIMIZATIONTEMPERATURESTRENGTH
Identifiers
- WoS UID
- 000367482800012



Login
Back to Publication list