Skip to content

Effect of Si addition on the microstructure, mechanical properties and tribological properties of Zr-Si-N nanocomposite coatings deposited by a hybrid coating system

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q1Scopus Q1
Journal
SURFACE & COATINGS TECHNOLOGY259 · pp.707 · 2014
Citation
Web of Science 40
JCR IF
JCR 2013 2.199
ISSN
0257-8972

Authors

  1. Choi, Ha songFirst authorSchool of Materials Science and Engineering, Pusan National University, Busan, South Korea
  2. Jang, JaehoSchool of Materials Science and Engineering, Pusan National University, Busan, South Korea
  3. Zhang, Teng FeiSchool of Materials Science and Engineering, Pusan National University, Busan, South Korea
  4. Kim, Jun-HoKorea Institute of Industrial Technology (KITECH), Busan, South Korea
  5. Park, In-WookKorea Institute of Industrial Technology (KITECH), Busan, South Korea
  6. Kim, Kwang HoCorresponding authorSchool of Materials Science and Engineering, Pusan National University, Busan, South Korea

Abstract

Zr-Si-N coatings with various Si contents were synthesized by a hybrid coating system combining arc ion plating and d.c. magnetron sputtering techniques. The influence of the Si content on the microstructure, mechanical properties and tribological properties of the Zr-Si-N coatings was investigated. The results showed that as the Si content increased from 0 to 5.8 at.%, the coatings transformed from a columnar ZrN to nanocomposite structure with a nano-sized ZrN crystallites embedded in amorphous Si3N4 matrix and further increases of Si content lead to amorphous-like coatings. The maximum hardness (H) of 33 GPa, Young's modulus (E) of 265 GPa, and H/E* value of 0.12 were obtained at Si content of 5.8 at.% in the Zr-Si-N coatings, respectively. The coating with the lowest friction coefficient and the best wear resistance was also obtained at Si content of 5.8 at.%, which was mainly contributed to high value of H/E* and formation of SiO2 or Si(OH)(4) self-lubricating layer due to the interface tribo-chemical reaction. (C) 2014 Elsevier B.V. All rights reserved.

Keywords

Zr-Si-N nanocomposite coatingsHybrid coating systemMicrostructureMechanical propertiesTribological propertiesCR-AL-NCATHODIC ARCTHIN-FILMSVACUUM-ARCTIN FILMSNITRIDEPLASMARESISTANCEBEHAVIORSTITANIUM

Identifiers

WoS UID
000347605200040