Skip to content

Thermal conductivity of anodized aluminum oxide layer: The effect of electrolyte and temperature

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q1
Journal
MATERIALS CHEMISTRY AND PHYSICS141(2-3) · pp.680 · 2013
Citation
Web of Science 46
JCR IF
JCR 2012 2.072
ISSN
0254-0584

Authors

  1. Lee, JunghoonFirst authorDepartment of Material Science and Engineering, Pusan National University, South Korea
  2. Kim, Yong-HwanDepartment of Material Science and Engineering, Pusan National University, South Korea
  3. Jung, UoochangKorea Institute of Industrial Technology, South Korea
  4. Chung, WonsubCorresponding authorDepartment of Material Science and Engineering, Pusan National University, South Korea

Abstract

Thermal conductivity of aluminum anodic oxide layers were measured using a steady-state method. The effects of chemical composition and oxide layer porosity, varied by electrolysis conditions, on thermal conductivity were analyzed. Measured thermal conductivities of oxide layers produced using different electrolytes were as follows; 1.31-1.62 W m(-1) K-1 for oxalic acid, 0.53-1.01 W m(-1) K-1 for sulfuric acid and 0.82-1.12 W m(-1) K-1 for mixed acid; values depended on electrolyte temperature. Oxide layers with higher porosities and O/Al ratios (a measured value of the amount of hydrated Al2O3 present) had lower thermal conductivities. Increasing electrolyte temperatures decreased O/Al ratios but the oxide layer became more porous. A reduction of the hydrated Al2O3 is believed to restrict a considerable decrease of thermal conductivity of oxide layer with increase of the porosity by increase of electrolyte temperature. The presence of sulfate chemicals in the oxide layer from the sulfuric acid containing electrolyte reduced thermal conductivity as compared with oxalic acid. (C) 2013 Elsevier B.V. All rights reserved.

Keywords

Thermal conductivityElectrochemical techniquesOxidesCoatingsENVIRONMENTAL-CONDITIONSATMOSPHERIC CORROSIONLASER IRRADIATIONWIDE-RANGEALLOYSFABRICATIONCOATINGSFILMSANODIZATIONCOMPOSITES

Identifiers

WoS UID
000323806600013