Improvement of mechanical properties of Al6061 extrudate by die cooling with N-2 gas during hot extrusion
- Document Type
- Publications · Journal Article
- Registered DB
- KCISCIEScopus
- Journal Ranking
- JCR Q3Scopus Q2
- Journal
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY27(1) · pp.153 · 2013
- Citation
- Web of Science 32
- JCR IF
- JCR 2012 0.616
- ISSN
- 1738-494X
Authors
- Ko, Dea HoonFirst authorPrecision Manufacturing System Division, Pusan National University, South Korea
- Kang, Boung-HoInterdisciplinary Department of Innovative Manufacturing Engineering, South Korea
- Ko, Dae-CheolIndustrial Liaison Innovation Center, Pusan National University, South Korea
- Kim, Byung MinCorresponding authorDepartment of Mechanical Engineering, Pusan National University, South Korea
Abstract
In this study, the mechanical properties of the extrudate are improved by correcting the defects such as abnormal grain growth (AGG). Die cooling with N-2 gas is conducted to control the extrusion temperature during the hot extrusion of Al6061 in order to obtain fine grains of the extrudate. Computational fluid dynamics (CFD) is conducted to evaluate the effect of die cooling with N-2 gas and to determine the relationship between AGG and the extrusion temperature. The optimal cooling channel with a high cooling effect is designed by using the design of experiment (DOE) method, and thermo-mechanical analysis is performed to predict the extrusion temperature. A hot extrusion experiment is also carried out to measure the extrusion temperature and to observe the microstructure of the extrudate. The extrusion temperature predicted from the thermo mechanical analysis is found to be in good agreement with the measured extrusion temperature. The process condition required to reduce the AGG is determined on the basis of the distribution of the evolved microstructure in the hot extrusion experiment. The results confirm the relationship between the distribution of AGG and the mechanical properties of the extrudate. It is confirmed that the mechanical properties of Al6061 can be improved by the application of die cooling with N-2 gas during the hot extrusion process.
Keywords
Abnormal grain growthAluminum hot extrusionDie coolingCFD analysisCooling channelHard disk armMICROSTRUCTURE ANALYSISALUMINUM EXTRUSIONALLOYSPREDICTIONEVOLUTIONSIMULATIONAA6060SIZE
Identifiers
- WoS UID
- 000313795000018



Login
Back to Publication list