Skip to content

FMEA for the reliability of hydroformed flanged part for automotive application

Document Type
Publications · Journal Article
Registered DB
KCISCIEScopus
Journal Ranking
JCR Q3Scopus Q2
Citation
Web of Science 8KCI 3
JCR IF
JCR 2012 0.616
ISSN
1738-494X

Authors

  1. Joo, Byeong-DonFirst author부산대학교, 공과대학, 기계공학부, KO
  2. Kim, Sangyun부산대학교, 공과대학, 기계공학부, KO
  3. Kim, Suhee부산대학교, 공과대학, 기계공학부, KO
  4. Moon, YounghoonCorresponding author부산대학교, 공과대학, 기계공학부, 정밀가공시스템전공, KO

Abstract

Tube hydroforming technology is widely used in the automotive industries due to its advantages such as weight reduction, increased strength, improved quality, and reduced tooling cost compared to conventional manufacturing technology. The hydroformed parts often have to be structurally joined at some point. Therefore, the hydroformed automotive parts which have a localized attachment flange are useful. In many cases, the parts formed by hydroforming process are directly related with structural safety, reliability of hydroformed parts must be considered. In this study, hydroforming process of flanged rectangular parts was designed and process reliability was investigated. Finite element analysis was performed to optimize tool geometry considering process parameters such as die aspect ratio and pressure conditions with Dynaform 5.5. Hydroforming experiments to fabricate a flanged rectangular part were performed with optimized tool geometry. The relationship between process parameters and defect was analyzed by FMEA (failure modes and effects analysis). The result shows that process condition was optimized and reliability of rectangular part was increased.

Keywords

Tube hydroformingFlanged partFMEAReliabilityFINITE-ELEMENT-ANALYSISALUMINUMSTEELOPTIMIZATIONPREDICTIONBEHAVIORTUBES

Identifiers

WoS UID
000313795000008
KCI
ART001729076