Skip to content

Porous mullite ceramics derived from coal fly ash using a freeze-gel casting/polymer sponge technique

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q1
Journal
JOURNAL OF POROUS MATERIALS20(1) · pp.219 · 2013
Citation
Web of Science 45
JCR IF
JCR 2012 1.348
ISSN
1380-2224

Authors

  1. Lee, J. H.First authorSchool of Materials Science and Engineering, Pusan National University, South Korea
  2. Choi, Hong JunSchool of Materials Science and Engineering, Pusan National University, South Korea
  3. Yoon, Seog YoungSchool of Materials Science and Engineering, Pusan National University, South Korea
  4. Kim, Byung KyuDepartment of Polymer Science and Engineering, Pusan National University, South Korea
  5. Park, Hong-ChaeCorresponding authorSchool of Materials Science and Engineering, Pusan National University, South Korea

Abstract

The objective of this study was to prepare highly porous mullite ceramics with relatively large-sized pores and improved compressive strength using a freeze/gel casting route combined with polymer sponge for recycling of coal fly ash into high value-added ceramics. In this work, a tertiary-butyl alcohol /coal fly ash slurry system with an appropriate addition of Al2O3 was used. A reticulated structure with large pore size of 220-300 mu m, which formed on burnout of polyurethane was obtained; then, the skeletons consisted mainly of more dense crystalline phases together with a few fine pores (< 3 mu m). The rod-shaped mullite crystals with an aspect ratio of > 3.7 (similar to 4 mu m in diameter) seen to have grown within the silicate melts existed. The compressive strength of the sintered porous materials increased in the reverse order of the degree of porosity, i.e. low porosity gave a high compressive strength. The porous materials with an average porosity of 61.6 %, sintered at 1600 A degrees C with 70 wt.% solid loading showed the maximum average compressive strength (similar to 45 MPa).

Keywords

Coal fly ashTertiary butyl alcoholFreeze-gel casting/polymer spongePorousMullite ceramicsMICROSTRUCTUREFABRICATIONSCAFFOLDSKAOLIN

Identifiers

WoS UID
000312933400024