Skip to content

Mechanical properties and cutting performance of Cr-Al-N hybrid coated microtool for micro high-speed machining of flexible fine die

Document Type
Publications · Journal Article
Registered DB
KCISCIEScopus
Journal Ranking
JCR Q2Scopus Q1
Journal
CURRENT APPLIED PHYSICS12 · pp.S14 · 2012
Citation
Web of Science 12
JCR IF
JCR 2011 1.9
ISSN
1567-1739

Authors

  1. Kim, Min WookFirst authorNational Core Research Center for Hybrid Materials Solution, Pusan National University, South Korea
  2. Kim, Kwang HoNational Core Research Center for Hybrid Materials Solution, Pusan National University, South Korea
  3. Kang, MyungchangCorresponding authorNational Core Research Center for Hybrid Materials Solution, Pusan National University, South Korea
  4. Cho, S. H.Nano Machining Laboratory, Korea Institute of Machinery and Materials (KIMM), South Korea
  5. Ryu, K. T.Finetech Co., Ltd, South Korea

Abstract

In this paper, comparative studies on mechanical properties and cutting performance between CrN and Cr-Al-N coatings for high-speed machining of flexible fine die (FFD) were conducted. Ternary Cr-Al-N coatings, in which Al was incorporated into CrN, were synthesized onto WC-Co substrates using a hybrid coating system of arc ion plating and sputtering techniques. From XRD analysis the nanocomposite Cr-Al-N coatings were related to the composite microstructure consisting of the fine CrN crystallites and amorphous Si3N4. The average friction coefficient of Cr-Al-N coatings gradually decreased with Al content in CrN coatings. The values of tool wear for uncoated, CrN and Cr-Al-N coated tools were evaluated under a high-speed cutting condition using a vertical high-speed machining center. Consequently, the ternary Cr-Al-N coated micro-tool showed good cutting performance under micro highspeed machining of AISI W1-8 steel of hardness 52 HRC for flexible fine die. (C) 2012 Elsevier B.V. All rights reserved.

Keywords

Flexible fine dieCr-Al-N coatingsMicro high-speed machiningMicro-hardnessTool wearCOATINGSCOMPOSITESYSTEMTOOLSWEAR

Identifiers

WoS UID
000310941500004