Experimental investigation on the drag reducing efficiency of the outer-layer vertical blades
- Document Type
- Publications · Journal Article
- Registered DB
- SCIEScopus
- Journal Ranking
- JCR Q2
- Journal
- JOURNAL OF MARINE SCIENCE AND TECHNOLOGY16(4) · pp.390 · 2011
- Citation
- Web of Science 8
- JCR IF
- JCR 2010 0.519
- ISSN
- 0948-4280
Authors
- Park, HyunFirst author부산대학교, 공과대학, 조선·해양공학과, KO
- An, Nam Hyun거제대학, Div Shipbldg & Marine Engn, KO
- Hutchins, NicholasUniv Melbourne, Dept Mech Engn, Melbourne, AT
- Choi, Kwing-SoUniv Nottingham, Sch Mech Mat Mfg Engn & Management, UK
- Chun, HoHwan부산대학교, 공과대학, 조선·해양공학과, KO
- Lee, InwonCorresponding author부산대학교, 공과대학, 조선·해양공학과, KO
Abstract
An experimental assessment has been made of the drag reducing efficiency of the outer-layer vertical blades, which were first devised by Hutchins and Choi (Proceedings of ASME FEDSM'02 2002 ASME Fluids Engineering Division Summer Meeting, Montreal) and Hutchins (An investigation of larger-scale coherent structures in fully developed turbulent boundary layers, Hutchins N (2003), PhD thesis, University of Nottingham). The reported drag reduction efficiency, which was as much as 30%, was quantified only in terms of the reduction in the local skin-friction coefficient. The assessment of the drag reducing efficiency did not take the side effects of the inclusion of the blades into considerations. Those effects are the increase in the wetted surface area and the flow disturbances due to the presence of the blades. In the present study, a series of drag force measurements in towing tank has been performed toward the assessments of the total drag reduction efficiency of the outer-layer vertical blades. It was found that for the case of h 4.0 x z 4.0 (h/delta = 1.04), the outer-layer vertical blades array achieved about 9.6% drag reduction without considering the increase in the wetted surface area. A proper scaling method to give collapsed plot of drag reduction efficiency C (F)/C (F0) was attempted, but the correlation remained limited. Of the two scaling methods, the outer scaling is found to be relevant one.
Keywords
Flow controlDrag reductionTurbulent boundary layerOuter-layer vertical blades
Identifiers
- WoS UID
- 000298056600003



Login
Back to Publication list