Skip to content

Effects of boron and silicon on microstructure and isothermal solidification during TLP bonding of a duplex stainless steel using two Ni-Si-B insert alloys

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2
Journal
MATERIALS SCIENCE AND TECHNOLOGY27(7) · pp.1191 · 2011
Citation
Web of Science 21
JCR IF
JCR 2010 0.709
ISSN
0267-0836

Authors

  1. Yuan, X. J.First author부산대학교, 공과대학, 재료공학부, KO
  2. Kim, M. B.부산대학교, 공과대학, 재료공학부, KO
  3. Kang, ChungyunCorresponding author부산대학교, 공과대학, 재료공학부, KO

Abstract

The influence of B and Si on microstructure and isothermal solidification during transient liquid phase (TLP) bonding of a duplex stainless steel using MBF-30 (Ni-4.5Si-3.2B, wt-%) and MBF-35 (Ni-7.3Si-2.2B, wt-%), was investigated. Based on experimental studies, the formation of Ni(3)B within the joint centreline is dependent on B content; the morphology of Ni(3)Si is dominated by Si concentration. There was a deviation between the times for complete isothermal solidification obtained by the experiment and the conventional TLP bonding model. Isothermal solidification of the liquid dependent on different solidification regimes is suggested to be a controlling factor contributing to the change in the rate of isothermal solidification observed using the two filler metals.

Keywords

Duplex stainless steelTLP bondingBrazingNi-Si-B insert alloyIsothermal solidificationSINGLE-CRYSTAL SUPERALLOYINCONEL 738LC SUPERALLOYNICKELTEMPERATUREINTERLAYERMETALEVOLUTIONBEHAVIORSYSTEMSJOINT

Identifiers

WoS UID
000292594700014