Skip to content

Pad roughness variation and its effect on material removal profile in ceria-based CMP slurry

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2
Journal
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY203(1-3) · pp.287 · 2008
Citation
Web of Science 40
JCR IF
JCR 2007 0.816
ISSN
0924-0136

Authors

  1. Park, BoumyoungFirst author부산대학교, 공과대학, 기계공학부, KO
  2. Lee, HyunSeop부산대학교, 공과대학, 기계공학부, KO
  3. Park, Kihyun부산대학교, 공과대학, 기계공학부, KO
  4. Kim, Hyoungjae한국생산기술연구원, Busan R&D Ctr, KO
  5. Jeong, HaedoCorresponding author부산대학교, 공과대학, 기계공학부, 정밀가공시스템전공, KO

Abstract

The pad roughness plays a key role in material removal in oxide chemical mechanical polishing (CMP).process. Its variation also has an effect on within wafer non-uniformity. The R-pk among roughness parameters, which is related to pad wear characteristics, was investigated to find the correlation between spatial roughness distribution of a polishing pad, and material removal profile in CMP, using two different types of slurries. The removal rate of ceria-based slurry for STI CMP was higher in the wafer center than that of the silica-based slurry. This is because the pad roughness distribution in a convex shape is formed across the pad radius in the contact area between pad and wafer instead of the degradation of pad roughness during CMP. Also, there is an increase of Rpk results in the increase of average friction force by comparison with the decrease of friction force in CMP using silica-based slurry. This result may be expected as the effect of the chemical tooth of ceria abrasive and slurry accumulation in the wafer center causes a roughening of the pad surface just as sandpaper. (C) 2007 Elsevier B.V. All rights reserved.

Identifiers

WoS UID
000256953800033