Skip to content

Effects of silicon surfactant in rigid polyurethane foams

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal
EXPRESS POLYMER LETTERS2(3) · pp.194 · 2008
Citation
Web of Science 82
ISSN
1788-618X

Authors

  1. Lim, H.First author한국포리올, KO
  2. Kim, S. H.부산대학교, 공과대학, 고분자공학과, KO
  3. Kim, Byung KyuCorresponding author부산대학교, 공과대학, 고분자공학과, KO

Abstract

The rigid polyurethane foams (RPUFs) have been fabricated from high functional crude 4,4'-di-phenylmethane diisocyanate (CMDI) and polypropylene glycols (PPGs) for a wide range of surfactant concentration with an environmently friendly blowing agent (HFC 365mfc). Cream time, gel time, and tack-free time increased with the addition of surfactant. Foam density decreased rapidly to a minimum at 0.5 pphp (part per hundred polyol) surfactant due to the increased blowing efficiency with surfactant. Surface tension rapidly decreased to an asymptotic value at 2 pphp surfactant. In accordance with this, cell size decreased and closed cell content increased rapidly to constant values at low surfactant concentrations (< 1 pphp). The decrease of cell size was accompanied by the decrease of thermal conductivity to give a linear relatiohship between the two implying that the series model of heat transfer is applicable.

Keywords

thermal propertiesrigid polyurethane foam (RPUF)cell structurecompression strengththermal conductivityMECHANICAL-PROPERTIESNANOCOMPOSITES FOAMSRAW-MATERIALSWATERTEMPERATUREREACTIVITYPOLYOL

Identifiers

WoS UID
000263686100006